Deutsch Color Alpen Stabil 10L interior/exterior paint

Product information:

• Matt surface
• Superior whiteness
• It is available in 4 basis W, P, D and TR
• Very good properties in workability and levelling
• Very good effect in shadow covering
• Good bonding properties and short drying time
• Product code: alsta10

Recommendations for use:

It is used in all interior, new, old and previously painted walls with cement base paint, cement, lime etc., in any kind of outdoor space, scratched plaster, plaster fnishing, grout façade, etc. and also to paint the concrete surfaces treated with liner.

Technical data:

• Resin: Acrylic copolymer
• Density (EN ISO 2811-1): 1,45±0,02 gr/ml
• Dry residue (EN ISO 3251) :  65%
• Dilution degree: 10 – 15%
• Viscosity:  110 ± 5 KU
• Drying time between two coatings: 2 – 4 hours
• VOC in the ready product (European Directive 2004/42/EC) (g/l):  ≤ 10
• VOC ambient emissions (Simulation chamber ISO 16000 (mg/m3):  ≤ 0.2
• Covering ability (EN ISO 6504-3) :  ≥ 99.5% Class I
• Washing resistance (ISO 11998) :  Class I

APPLICATION GUIDELINES

•  Application method: Brush, roller or spraying
• Thinning: It is recommended to be diluted 10-15% with water, except the D and TR bases that are not suggested to be diluted more than 5%.

SURFACE PREPARATION

The surfaces should be completely dry, clean and free from dust and elements that hinder the adhesion of the paint. Repair all cracks and damaged parts using the line products of Deutschcolor, Spachtel Massen, etc. Then, it is recommended to apply the Macht Tiefgrund Wasser liner, diluted with 1:1 water When applying the liner, avoid creating a flm, which then creates problems in gluing the paint to the support.

PRODUCT PREPARATION

Dilute the product Alpen Stabil water 10-15% water, except for D and TR basis, which are recommended not to be diluted with more than 5% water, making sure it is fully mixed with the paint. Use a low speed electric mixer to make a mixture as uniform and complete as possible.

APPLICATION OF PRODUCT

Product Application Alpen Stabil is applied by brush or roller. The application cycle includes at least the application of two coatings of paint. The time needed between the two coatings is 2-4 hours depending on weather conditions, temperature and humidity. Clean the working tools with water before the paint dries.

PACKAGING

10 lt

STORAGE

36 months if stored in a dry place, away from heat sources, at a temperature between +5°C and +30°C. Protect it from frost.

HEALTH AND SAFETY INFORMATION

Keep out of reach of children. In case of contact with the eyes or swallowing, please seek medical advise immediately and show the contents of the container. Do not dispose the product into drains.

NOTES

In new concrete surfaces the product is recommended to be used at least after approx. 30-40 days.